Products: Single-ended Directly Heated Triode Power Amplifiers: SH-833


Model : SH-833

Directly Headed Triode
  Single Ended Power Amplifier
Features

-This highly specified amplifier is designed with all our technique as WAVAC Audio Lab special 10th anniversary model.

-This is a Hi-Fi monoblock amp which has achieved world first Class A 150W single ended. This model has the most powerful output in the world as a Class A directly heated triode single ended amplifier.

-Highly powerful single ended monoblock amp which takes advantage of directly heated triode 833 used for communication.

-The power circuit was newly developed, based on the concept of "pure power is needed to make the best sound", which can supply enough power for the power amp, recreate more powerful sound and especially improves bass sound quality.

-The power circuit can supply pure power by cutting bilateral noise to the amp part by having different chassis of isolation part, transformer part and stabilized power supply part. This isolation part of the power circuit reduces noise by using excellent noise-cut transformers made of DENKENSEIKI Laboratory Co..

-The power supply transformer has 5 different transformers for each power circuit to prevent bilateral effect and supply enough power to the amp part.

-Stabilized power supply part rectifies by Silicon-diode which can rectify well without grid to have perfect regulation.

-The amp part uses silver wires for all the wires and gold plated phosphor bronze for the terminal to eliminate signal deterioration and improve sound quality.

-Clear and full bass sound can be reproduced by IITC (Inverted Interstate Transformer Coupling) circuit.

-The signal circuit is directly connected with transformers without a condenser and composes direct circuit to have a dynamic range.

-All the tube heaters are rectified by Silicon-diode and filter is DC ignited by a large volumetric condenser to reduce hum noise.

-Chassis employs pin pointed base and Beta-GEL as a vibration absorber and all the tube sockets are also designed to prevent vibration effect by Beta-GEL.

-The input tube employs brilliant triode WE437 tubes which has 950 ohm of internal resistance and low rp with 41 of .

-The driver tube acquires enough power and linearity by triode-connected of KT-88.

-Amp chassis used as a main chassis is NC processed from 60mm solid aluminum and alumite processed with beautiful gold champagne.

-High quality tube sockets are machined from Teflon and use gold plated round  pin made of phosphor bronze as a contact which improves insulation performance to eliminate signal detererioration.

-Excellent 833 modern amp reproduces real an beautiful music with light of Thorium-Tungsten inside the laboratory glass case.


Specification
Power Tube 833
Effective Power output 150 watts
Frequency range 20Hz-100KHz
Input sensitivity 1.0Vrms
Input impedance 100k ohms
S/N ratio >100dB
Power consumption 800W(each)
Power supply 100,110,120,220,230,240
VAC 50-60Hz
(selected when shipped)
Load impedance 4/8 ohms
External dimensions 435Wx525Dx305H(mm)
Weight 50kg(each)
(exclude power supply)


Home News Products Event
Contact Distributor   Profile

Copyright © 1996- WAVAC Audio Lab. Co., Ltd.